Award Winning Bomanite Alloy Decorative Concrete Street Design Connects World Trade Center Tower Two To Tower One

Facebooktwitterredditpinterestlinkedinmail

Subway entrance to World Trade Center Tower Two surrounded by Bomanite Exposed Aggregate Systems using Bomanite Alloy decorative concrete.World Trade Center Tower Two is built out only to the ground floor with lots of corrugated street-level wall space for vibrant commissioned street art murals.  Bomanite Licensee, Beyond Concrete, was called upon to help with the Landscape Architects street design for the new World Trade Center Tower Two. The plan called for a street design with sitting area located between the two towers, connecting the next to be constructed Tower Two, and the newly finished Tower One.

Being that this project was the World Trade Center rebuild security was top notch during the installation. Working at the site required daily security passes for all Beyond Concrete’s crew members. It took as much as two hours each day to go through the security checks, lunch breaks required the General Contractor, Posillico Civil, Inc. to provide an escort so the Beyond Concrete team could return to the work area.

View of seating area at the World Trade center with Bomanite Exposed Aggregate usind Bomanite Alloy decorative concrete in the award winning street design.The theme of the design was to have the overall tone set in the gray family, starting from light gray at the building line and transitioning to dark gray by the street area. The project design consisted of approximately 7200 sq. ft. of 7” thick, epoxy reinforced concrete, poured in five twelve-foot-wide strips, each strip approximately 120 feet long. The 12 ft. wide strips were divided into 12’ x 12’ squares and saw cut into 3’ x 6’ rectangles for dimension and style.

Connecting buildings with a street design using Bomanite Exposed Aggregate with Bomanite Alloy decorative concrete at the World Trade Center.The World Trade Center Tower project required multiple samples and conversations with the architect given the complexity of design and the various pour thicknesses the site dictated. The original request was for the Bomanite Exposed Aggregate Sandscape Texture System in five different shades of gray to be installed in sequence, exposing local sands within the integrally colored concrete.

It was determined that in order to have a consistent appearance there needed to be two processes used on site to accommodate the conditions that both resulted in the same finish. A bonded overlay for thinner sections and an unbonded topping slab for thicker. Once the process was determined and the architect saw the more decorative Bomanite Alloy finishes, the decision to use the Bomanite Exposed Aggregate Alloy System was clearly the best choice.

The many tones of gray in the award winning street design with Bomanite Exposed Aggregate Systems using Bomanite Alloy decorative concrete at the World Trade Center.Some sections of the installation required priming and a mortar bed that was slurry overlayed with Bomanite Alloy Color Hardener. The standard areas used conventional concrete with the Bomanite Alloy Color Hardener applied in a traditional dry-shake fashion. All areas received the same final finishing and exposure of the fine reflective aggregates contained within the Alloy.  The color started with Bomanite Nickel Gray Alloy and progressed towards the street with Shale Gray, Castle Gray, Coal Gray and ended with Cobblestone Gray.

Beyond Concrete achieved the Architects vision with the best Bomanite Decorative Concrete System and in conjunction provided a low-maintenance, high wear resistant, architectural concrete finish for the 2 World Trade Center Tower Street Design. For their outstanding work, Beyond Concrete received the 2018 Best Bomanite Exposed Aggregate Project Bronze Award. Bomanite Decorative Concrete at its finest!